Error Codes - Kemppi X8 MIG Welder Operating Manual

4.5 Error codes

Control Pad
In error situations, Control Pad displays the number and title of the error, a description of the possible cause (Reasons)
and the Actions to fix the error. Go to View > Error log to see the error history.
Wire feeder control panel
The wire feeder control panel displays the number and title of the error.
Gun remote control display
The gun remote control display does not display the error code, just an error/warning symbol. Check the Control Pad or
Wire feeder control panel to see more information.
SYMBOL IN GUN REMOTE
CONTROL DISPLAY
© Kemppi
MEANING
System warning. The warning concerns an error in the system, for example, low liquid level. The sym-
bol first blinks for 10 seconds, then stays solid.
Welding is enabled even though the symbol is displayed.
WPS warning. One of the most essential welding parameters has been adjusted beyond the limits of
the WPS in use. The parameter in question is displayed in red.
Welding is enabled even though the symbol is displayed.
System error. Welding is disabled.
134
X8 MIG Welder
Operating manual - EN
1902370 / 2324