Table of Contents
Advertisement
1. GENERAL
These instructions describe the use of Kemppi's X8 MIG Welder, the top-class welding system for demanding industrial
use. The system consists of a power source, wire feeder, welding gun, Control Pad and various welding software com-
ponents and connectivity to Kemppi cloud services. Read the instructions through carefully.
Note: Gives the user a useful piece of information.
Caution: Describes a situation that may result in damage to the equipment or system.
Warning: Describes a potentially dangerous situation. If not avoided, it will result in personal damage or fatal injury.
DISCLAIMER
While every effort has been made to ensure that the information contained in this guide is accurate and com-
plete, no liability can be accepted for any errors or omissions. Kemppi reserves the right to change the spe-
cification of the product described at any time without prior notice. Do not copy, record, reproduce or transmit
the contents of this guide without prior permission from Kemppi.
"System introduction" on the next page
"System structure" on page 10
"Installation" on page 21
"Operation" on page 59
"Troubleshooting" on page 132
"Maintenance" on page 128
"Technical data" on page 136
© Kemppi
6
X8 MIG Welder
Operating manual - EN
1902370 / 2324
Advertisement
Table of Contents
