How To Get Welding Programs - Kemppi X5 FastMig Series Operating Manual

X5 FastMig
Operating manual - EN

2.13 How to get welding programs

The use of additional welding programs and Wise features is possible with the X5 FastMig Synergic equipment.
The welding programs and Wise features (WiseSteel, WiseFusion and WisePenetration+) for each individual X5
FastMig equipment are installed at the time of purchase according to your specific welding requirements. This can
be done by your local Kemppi dealer. Welding programs and Wise features can also be added later on.
For more information on the available X5 FastMig welding program options and installing the welding programs as
well as software updates, contact your local Kemppi dealer or go to Kemppi.com.
The X5 FastMig equipment is also available with a welding program work pack preinstalled. These work pack ver-
sions cover the basic welding tasks with the automatic 1-MIG welding process.
The manual MIG process doesn't require additional welding programs.
For applying welding programs on your X5 FastMig equipment, refer to "Auto control panel: Applying welding pro-
grams" on page 79.
© Kemppi
55 1920960 / 2039