Control Pad Views: Welding - Kemppi X8 MIG Welder Operating Manual

Control Pad views: Welding

In the Welding view, you can:
• See an overview of the settings of the selected welding program
• Adjust the main parameters (welding power and fine tuning)
Depending on the selected welding process, function and program, some or all of the following information is shown:
1. Memory channel, its number and the welding program
>> The first row shows the memory channel's name.
>> The second row shows the welding program's name, which consists of the filler wire material and diameter and
the shielding gas.
>> If you have modified the welding settings, the channel number tilts to the right. To save changes, press and
hold the Channel button until the number returns to its normal position.
2. Operation mode of the welding gun (trigger logic)
>> 2T, 4T or WP Switch. For more information, see "Trigger logic functions" on page 100.
3. Touch sense ignition
>> Option for smooth ignition with less spatter.
4. Upslope
>> The selected start and stop logics.
5. Estimated welding current
6. Estimated plate material thickness
7. Wire feed speed
8. Serial number of the power source, wire feeder's number (1 or 2) and user name
9. Welding process
10. Hot start
>> The selected start and stop logics.
11. Crater fill
>> The selected start and stop logics.
12. Voltage
13. Voltage/Fine tuning
Adjust the welding power with the left control knob.
Fine tune the secondary welding parameter with the right control knob. The adjustable secondary parameter varies
according to the welding process and function.
© Kemppi
63
X8 MIG Welder
Operating manual - EN
1902370 / 2324