3.
Move the focus to the WPS that you want to activate.
4.
Depending on the mode of Control Pad, select one of the following options:
>> If the Control Pad is in the Advanced mode, press the green button to open the Actions menu. Select Activate
WPS.
>> If the Control Pad is in the Basic mode, press the green button to activate the WPS.
Control Pad opens the WPS view. Here you can see all the WPS details that the welder needs to know for the job, includ-
ing the pictures and details of the filler and the gas.
© Kemppi
107
X8 MIG Welder
Operating manual - EN
1902370 / 2324