HMS Networks Anybus CompactCom 40 Network Manual page 81

Network PROFINET IO Object (0Eh)
10.8.15. Command Details: Ident_Change_Done
Category
Extended
Details
Command Code: 1Ah
Valid For: Object Instance
Description
This command shall be sent to the module when the host application has finished its adaptations of the Real
Identification.
It is optional to implement support for this command, except for that it must be issued if the host application
previously has responded with Block to the command Expected_Ident_Ind (1Bh).
• Command Details
Field Contents
CmdExt[0] AR handle (low byte)
CmdExt[1] AR handle (high byte)
• Response Details
(No data)
SCM-1202-021 Version 2.6
® ™
Anybus CompactCom 40 - PROFINET IRT Transparent
Comments
Handle for the Application Relationship (AR)
Ethernet
Page 73 of 177