HMS Networks Anybus CompactCom 40 Network Manual page 137

PROFINET IO Object (F6h)
• Response Details
(no data)
11.7.13. Command Details: Indicate_Device
Category
Extended
Details
Command Code: 1Eh
Valid For: Object Instance
Description
This command is optional. The module issues this command to inform the application that the DCP command
Set Control/Signal has been received on the network. This is used by engineering tools to identify the node on
the network. The application should flash its dedicated Network Status LED for 3 seconds after receiving this
command.
• Command Details
Field
CmdExt[0]
CmdExt[1]
• Response Details
(no data)
SCM-1202-021 Version 2.6
Anybus
Contents
(reserved)
® ™
CompactCom 40 - PROFINET IRT Transparent
Comments
Ethernet
Page 129 of 177