HMS Networks Anybus CompactCom 40 Network Manual page 75

Network PROFINET IO Object (0Eh)
10.8.9. Command Details: Pull_Module
Category
Extended
Details
Command Code: 12h
Valid For: Object Instance
Description
This command removes a module from the configuration. Can be issued at any time. During runtime, it can
be called in case there are changes to the Real Identification. The Anybus CompactCom 40 PROFINET IRT then
automatically issues a Pull or Pull Module alarm to the master.
• Command Details
Field Contents
CmdExt[0] (reserved, set to zero)
CmdExt[1]
Data[0] API (low word, low byte)
Data[1] API (low word, high byte)
Data[2] API (high word, low byte)
Data[3] API (high word, high byte)
Data[4] SlotNr (low byte)
Data[5] SlotNr (high byte)
SCM-1202-021 Version 2.6
® ™
Anybus CompactCom 40 - PROFINET IRT Transparent
Comments
(reserved for future use)
Application Process Instance (API)
See also...
– Application Process Instances (API) (page 12)
Slot number of module.
Range:
0... 0x7FFF
Ethernet
Page 67 of 177