Network PROFINET IO Object (0Eh)
10.8.14. Command Details: IM_Options
Category
Extended
Details
Command Code:
18h
Valid For:
Object Instance
Description
During startup, this command can be called to specify if I&M data for Slot0 (DAP) and/or Slot > 0 should be
forwarded transparently by the Anybus CompactCom module. Additionally, it provides a way for the application
to specify the I&M0 Filter Data.
I&M0 Filter Data is composed of three blocks: I&M0 Carrier Data, Module Representative Data and Device
Representative Data (see table below). A submodule can belong to several blocks.
I&M0 Filter Data Contents
Content
I&M0 Carrier Data
Module Representative Data
Device Representative Data
When transparent I&M data for slot > 0 is enabled, the application must store I&M data for modules located in
slots > 0 to nonvolatile memory. In this case, all modules that carry discrete I&M data shall be included in the
I&M0 Carrier Data. (The Anybus CompactCom 40 PROFINET IRT will include the DAP submodule (located in slot
0, subslot 1) in the I&M0 Carrier Data and Device Representative Data.)
When transparent I&M data for slot 0 is enabled, the application must store I&M data for slot 0 to nonvolatile
memory. The DAP submodule is by default included in the I&M0 Carrier Data and Device Representative Data
but may be removed from any of the blocks using the IM_Options command.
See also...
•
Flowchart — I&M Record Data Handling (page
• Get Record, command details in
• Set_Record, command details in
SCM-1202-021 Version 2.6
Description
List of all submodules being a carrier of discrete I&M data
Block is mandatory to support according to the PROFINET specification
List of all submodules acting as module representative
Block is optional to support according to the PROFINET specification
List of at least one submodule where I&M1, I&M2, and I&M3 can be written
Block is mandatory to support according to the PROFINET specification
140).
PROFINET IO Object (F6h) (page 112)
PROFINET IO Object (F6h) (page 112)
®
™
Anybus
CompactCom
40 - PROFINET IRT Transparent
Ethernet
Page 71 of 177
Need help?
Do you have a question about the Anybus CompactCom 40 and is the answer not in the manual?
Questions and answers