HMS Networks Anybus CompactCom 40 Network Manual page 159

Conformance Test Guide
Appendix G. Conformance Test Guide
1. General
When using the default settings of all parameters, the Anybus CompactCom 40 PROFINET IRT is precertified for
network compliance. This precertification is done to ensure that your product can be certified.
Changes in the parameters in the example GSD file, supplied by HMS Industrial Networks, will require a
certification. A vendor ID can be obtained from PNO and is compulsory for certification. This chapter provides a
guide for successful conformance testing your product, containing the Anybus CompactCom 40 PROFINET IRT, to
comply with the demands for network certification set by the PNO.
Independent of selected operation mode, the actions described in this appendix have to be accounted for in the
certification process. The identity of the product needs to be changed to match your company and device.
For multiple-API implementations, e.g. PROFIdrive, one of the submodules belonging to the "non-zero API" must
be inserted in the I&M0 Filter Data by the application, using the command IM_Options.
IMPORTANT
This appendix provides guidelines and examples of what is needed for certification. Depending on the
functionality of your application, there may be additional steps to take.
Please contact HMS Industrial Networks for more information.
SCM-1202-021 Version 2.6
® ™
Anybus CompactCom 40 - PROFINET IRT Transparent
Ethernet
Page 151 of 177