HMS Networks Anybus CompactCom 40 Network Manual page 70

® ™
Anybus CompactCom 40 - PROFINET IRT Transparent
Ethernet
10.8.6. Command Details: Plug_Module
Category
Extended
Details
Command Code: 10h
Valid For: Object Instance
Description
This command may be called during start-up to specify the Real Identification. It may also be called during
runtime in case there are changes to the Real Identification.
NOTE
It is only permitted to issue this command if API_Add has been issued first.
• Command Details
Field Contents
CmdExt[0] (reserved, set to zero)
CmdExt[1]
Data[0] API (low word, low byte)
Data[1] API (low word, high byte)
Data[2] API (high word, low byte)
Data[3] API (high word, high byte)
Data[4] SlotNr (low byte)
Data[5] SlotNr (high byte)
Data[6] ModIdent (low word, low byte)
Data[7] ModIdent (low word, high byte)
Data[8] ModIdent (high word, low byte)
Data[9] ModIdent (high word, high byte)
See also...
– Real Identification (RI) (page 15)
– Configuration Mismatch (page 17)
Page 62 of 177
Network PROFINET IO Object (0Eh)
Comments
(reserved for future use)
Application Process Instance (API)
See also...
- Application Data Instances (ADIs) (page 10)
Destination slot for module
Range:
0... 0x7FFF
Module identified as stated in the GSD-file
SCM-1202-021 Version 2.6