Saving And Loading Mixer Settings - Roland M-200i V-mixer Owner's Manual

• INITIALIZE
This accesses the INITIALIZE screen, where you can initialize
the mixer settings (p. 84).
• SYSTEM UPDATE
This updates the system programs.
SYSTEM UPDATE is for future system-program updates. For
details on the system update procedure, refer to the operating
instructions provided with the updater.
• USB MEMORY
This formats USB memory or tests the speed of USB memory
(p. 85).
Saving and loading mixer
settings
You can use USB memory to save or load mixer settings as a
project file.
You use the LOAD/SAVE screen to save or load mixer settings.
The project file is backed up to the following folder in USB
memory:
: /RSS/M-200i/PROJ
Accessing the LOAD/SAVE screen.
1.
Access the SETUP screen.
2.
Select "LOAD/SAVE" and press [ENTER].
The LOAD/SAVE screen is displayed.
Loading mixer settings from USB
memory
1.
Access the LOAD/SAVE screen.
2.
From the project file list, select the file you want to load
and press [ENTER]. A popup appears.
3.
Select the LOAD and press the [ENTER] button.
A screen appears where you can select the sections whose
mixer settings you want to load.
4.
Select the sections you want to load, then move the
cursor to the LOAD button and press [ENTER].
A message prompting you to confirm the operation is
displayed.
5.
Pressing [ENTER] executes the load operation, displaying
a "now processing" message to indicate the progress of
loading.
When loading is complete, the progress message
disappears.
Pressing [EXIT] cancels the operation.
Never disconnect the USB memory or turn off the M-200i's
power while data is being loaded from USB memory. Doing
so might corrupt the data saved in USB memory.
SETUP screen
81