Copying Macro Settings; Swapping The Macro Settings - Roland VR-6HD Reference Manual

Other Functions

Copying Macro Settings

Here's how to copy the settings from one macro to another.
Ó
1 .
[MENU] button "MEMORY/MACRO/SEQ"
"MACRO", and press the [VALUE] knob.
The macro screen appears.
2 .
Long-press the area corresponding to the copy source
macro number.
Switch between pages
Long-press
A popup menu appears.
3 .
Touch <COPY>.
A cursor appears, which is used to select the copy destination.
4 .
Use the [VALUE] knob to select the copy destination macro
number, and then press the [VALUE] knob.
A confirmation message appears.
* If you decide to cancel, press the [EXIT] button.
5 .
Use the [VALUE] knob to select "OK", and then press the
[VALUE] knob.
The macro settings are copied.
72

Swapping the Macro Settings

Here's how to swap settings between macros.
Ó
1 .
select [MENU] button
"MACRO", and press the [VALUE] knob.
The macro screen appears.
2 .
Long-press the area corresponding to the swap source
macro number.
A popup menu appears.
3 .
Touch <SWAP>.
A cursor appears, which is used to select the swap destination.
4 .
Use the [VALUE] knob to select the copy destination macro
number, and then press the [VALUE] knob.
A confirmation message appears.
* If you decide to cancel, press the [EXIT] button.
5 .
Use the [VALUE] knob to select "OK", and then press the
[VALUE] knob.
This swaps the settings of the macros.
Ó
"MEMORY/MACRO/SEQ"
Switch between pages
Long-press
Ó
select