List Operations; Copying Channel Settings To The Clipboard - Roland M-200i V-mixer Owner's Manual

Basic operation

List operations

The selected item in a list is highlighted. Use the up/down keys or
the value dial to select a different item.
An item that has an accessible screen with more detailed settings
is displayed with an arrow as shown in the figure above. To
access the detailed setting screen, move to the item displayed
with an arrow and press [ENTER].
The currently selected items are displayed with check marks.
Check boxes are displayed when it is possible to select more than
one of multiple choices.
Press [ENTER] to change setting values in a list, then use the value
dial to manipulate.
28
Copying channel settings to the
clipboard
Channel settings can be saved on the clipboard.
1.
At the editing screen for the desired channel, access the
FUNCTION screen.
2.
Move the cursor to "COPY" and press [ENTER].
A message announcing the completion of the copy
operation is displayed.
When using the COPY function on the CHANNEL EDIT screen for
CH 1- 32, the following parameters of the selected channel are
saved to the clipboard:
Patch Input patch
Polarity Polarity
ATT Attenuator
HPF High-pass filter
Gate Gate/expander
Comp Compressor
EQ 4-band EQ
Fader Fader
Pan Pan
Send AUX/MTX sends
Direct Direct out point
Group DCA groups, mute groups
To MAIN MAIN button