7.
Select 'Save to'.
Once ready, you can continue to the Welding parameters view to adjust the welding settings for the new channel, cre-
ate a new channel or go back to the Memory channels view.
Tip: It is also possible to create new channels based on all of the unused welding programs available by selecting
Create all in the Memory channel view's Actions menu. This option uses the available memory channel slots.
3.2.17 Weld data
After each weld, a weld summary is displayed briefly. To change the weld data view duration or how the weld data aver-
ages are calculated (with or without slope phases) refer to "Device settings" on page 123.
© Kemppi
135
AX MIG Welder
Operating manual - EN
1921900 / 2318