2.7 Removing and attaching RCM top cover
This section describes how to remove and attach the RCM top cover.
Tools needed:
To remove the RCM top cover:
1.
Loosen the screws on both sides of the RCM case.
2.
Unscrew the fixing screws on the top cover and remove the cover.
To attach the RCM top cover:
Align the holes on the cover with the screws on the sides of the RCM case. Tighten the six screws on the sides and the
two screws on the top.
© Kemppi
31
AX MIG Welder
Operating manual - EN
1921900 / 2318