Kemppi AX MIG Welder Operating Manual page 109

Post gas
1-MIG welding parameters
The parameters listed here are available for adjustment only with the 1-MIG process.
Parameter
Welding program
Process
Pre gas
Creep start
Touch Sense Ignition
Upslope
- Upslope start level
- Upslope time
© Kemppi
0.0 ... 9.9 s, AUTO, step 0.1
0.0 = OFF
Default = AUTO
Parameter value
MIG, 1-MIG, Pulse, DPulse, WiseRoot+,
WiseThin+, MAX Cool, MAX Speed, MAX
Position
0.0 ... 9.9 s, AUTO, step 0.1
0.0 = OFF
Default = AUTO
10 ... 100 %, AUTO, step 1
Default = AUTO
AUTO/OFF/ON
Default = AUTO
ON/OFF
Default = OFF
10 ... 100 %, step 1
Default = 50
0.1 ... 5 s, step 0.1
Default = 0.1
109
Operating manual - EN
Welding function that continues the
shielding gas flow after the arc has extin-
guished. This ensures that the hot weld
does not come into contact with air after
the arc is extinguished, protecting the
weld and also the electrode. Used for all
metals. Especially stainless steel and
titanium require longer post gas times.
Description
Displays the welding program in use. You
cannot change the welding program in
this view. For changing a welding pro-
gram, refer to "Applying welding pro-
grams" on page 133.
This MIG welding process selection
depends on the active welding program.
For more information on the additional
processes, refer to "Additional guidance
to functions and features" on page 137.
Welding function that starts the shielding
gas flow before the arc ignites. This
ensures that the metal does not come
into contact with air at the start of the
weld. Time value is preset by the user.
Used for all metals, but especially for
stainless steel, aluminum and titanium.
The Creep start function defines the wire
feed speed before the welding arc
ignites, that is, before the filler wire
comes in contact with the workpiece.
When the arc ignites, the wire feed speed
is automatically switched to the normal
user-set speed. The Creep start function
is always on.
Touch Sense Ignition delivers minimum
spatter and stabilizes the arc immediately
after ignition.
Upslope is a welding function that
determines the time, during which the
welding current gradually increases to
the desired welding current level at the
start of the weld. The upslope start level
and time are preset by the user.
AX MIG Welder
1921900 / 2318