Kemppi AX MIG Welder Operating Manual page 128

Changing fieldbus settings
1. Select the settings parameter for adjustment.
2. Select the settings value.
>> Depending on the settings parameter to be adjusted, refer also to the Fieldbus settings tables below for more
details.
3. Confirm the new value / selection and close the adjustment view by selecting 'Save'.
Fieldbus settings
Modbus TCP
This table lists the Modbus TCP fieldbus settings.
Parameter
Identification information
Vendor name
Product code
Vendor URL
Product name
Model name
User application name
Module version
MAC address
Configuration parameters
IP mode
IP address
Subnet mask
Gateway
DNS 1
DNS 2
Hostname
Domain
Comm 1 mode
© Kemppi
Value Description
Kemppi Vendor identifier assigned to Kemppi.
Ordering code of the fieldbus module.
www.kemppi.com Vendor's URL address.
AX MIG Welder Name of the welding system.
AX MIG Welder Name of the welding system.
Welding automation Application description.
Example: 1.23.4 Software version of the fieldbus module.
Example: The unique address identifier of the fieldbus module's Ethernet
AA:BB:CC:DD:EE:FF port.
Static IP Static IP: The IP address parameter values must be entered
Client manually.
Client: The IP address parameter values come from the DHCP
server.
Customer-specific IPv4 address for the fieldbus module.
Subnet mask for the fieldbus module.
IPv4 address of the gateway (if used). This field can be empty.
IPv4 address of the primary DNS server. This field can be empty.
IPv4 address of the secondary DNS server. This field can be
empty.
Host name limited to 64 characters. This field can be empty.
Domain name limited to 48 characters. This field can be empty.
Automatic Ethernet speed / duplex for port 1.
10 MBit Half Duplex In the Automatic mode, the fieldbus module chooses the cor-
10 MBit Full Duplex rect mode automatically.
100 MBit Half Duplex
100 MBit Full Duplex
128
AX MIG Welder
Operating manual - EN
1921900 / 2318