Kemppi AX MIG Welder Operating Manual page 117

If the selected memory channel is not active, activate the selected weld pass and the memory channel by selecting 'Activ-
ate'.
The welding parameters are still manually adjustable, but the adjustment ranges defined on the active WPS are indic-
ated on the screen (1). If you adjust the welding parameters outside the adjustment range defined on the active WPS, a
warning (2) is displayed in the home view and in the start and stop graph of the welding parameters view.
The active WPS can be deactivated by selecting 'Unlink' in the WPS's weld pass actions menu.
More feature descriptions here:
>> "Digital Welding Procedure Specification (dWPS)" on page 141
>> "WeldEye ArcVision" on page 141
© Kemppi
117
AX MIG Welder
Operating manual - EN
1921900 / 2318