Kemppi AX MIG Welder Operating Manual page 97

Home
Memory channels
Welding parameters
Weld Assist
Users
WPS
Tools
Info
Robot status
Logbook
Weld history
Device settings
Network settings
Fieldbus settings
Robot settings
Adjustment views
In adjustment views you can adjust parameter values with a number pad or a slider.
1. Select to change to a number pad.
2. Select to change to a slider.
Scaling
The views scale differently depending on the device used.
© Kemppi
97
AX MIG Welder
Operating manual - EN
1921900 / 2318