Table of Contents
Advertisement
3.2.16 Applying welding programs
To select and apply a MIG welding process and program, a corresponding memory channel must be created.
The use of additional welding programs and Wise and MAX features is possible with X5 standard power source. Pulse
power source is required for the MAX Position (optional) process and Pulse+ power source for the WiseRoot+
(optional) and WiseThin+ (optional) processes.
Use the welding program that is in accordance with your welding setup (e.g. welding wire and gas properties).
1.
Go to the Memory channels view.
2.
Open the 'Actions' menu.
3.
Select 'Create channel'.
>> A filter view opens:
© Kemppi
133
AX MIG Welder
Operating manual - EN
1921900 / 2318
Advertisement
Table of Contents
