Installing Power Source Mains Plug - Kemppi AX MIG Welder Operating Manual

2.1 Installing power source mains plug

Only an authorized electrician is allowed to install the mains cable and plug.
Do not connect the machine to the mains before the installation is complete.
Install the mains plug according to the power source and site requirements.
The mains cable includes the following wires:
1. Brown: L1
2. Black: L2
3. Grey: L3
4. Yellow-green: Protective earth
Cable type and fuse rating requirements:
Unit amperage
400 A
400 A MV
500 A
© Kemppi
Cable type
2
4 mm
2
6 mm
2
6 mm
22
Operating manual - EN
Fuse rating
25 A @ 380-460 V
25 A @ 220-230 V
32 A @ 380-460 V
32 A @ 380-460 V
AX MIG Welder
1921900 / 2318