AX MIG Welder
Operating manual - EN
2.27 Fieldbus control tables
Fieldbus control tables can be used to handle the communication between AX MIG Welder and the welding robot.
This section describes the supported fieldbus control tables, and the control and status parameters.
"AX MIG 1: AX MIG Welder default fieldbus control table" on the next page
"KEMPPI 1: KempArc Pulse compatibility fieldbus control table" on page 75
"KEMPPI 4: A7 MIG Welder compatibility fieldbus control table" on page 77
"KEMPPI 6: A7 MIG Welder WeldEye compatibility fieldbus control table" on page 80
"Control information" on page 84
"Status information" on page 85
69
© Kemppi
1921900 / 2318