Table of Contents
Advertisement
2.17 Connecting cables to wire feeder
For the wire feeder connector descriptions and their locations, refer to "R500 wire feeders" on page 11.
Model-specific variations occur in the connectors.
Front
1.
Connect the control cable for welding gun auxiliary devices (1) to the peripheral connector.
2.
Connect the welding current cable (2) to the positive (+) connector and tighten it with an appropriate tool.
3.
R500 Wire Feeder EUR+: To use gun cleaning with compressed air, connect the compressed air hose (3) to the outlet
connector.
4.
Push the welding gun connector (4) to the euro connector and hand-tighten the collar.
5.
If you have the optional cooling unit, connect the cooling liquid hoses (5).
Rear
© Kemppi
49
AX MIG Welder
Operating manual - EN
1921900 / 2318
Advertisement
Table of Contents
