Logbook - Kemppi AX MIG Welder Operating Manual

EtherCAT
This table lists the EtherCAT fieldbus settings.
Parameter
Identification information
ETG Vendor ID
Device type
Product code
Serial number
Device name
Hardware version
Module version
Configuration parameters
Device ID
Profinet
This table lists the Profinet fieldbus settings.
Parameter
Identification information
Device ID
PNO Vendor ID
Station type
Order ID
Serial number
Hardware version
Module version
Port 1 / Port 2 MAC address

3.2.14 Logbook

Logbook collects information about system operation and welding into one view for monitoring and troubleshooting.
You can use filters to show/hide content. Selecting a row opens the
© Kemppi
Value Description
0x00FE0001 Vendor identifier assigned to Kemppi by ETG (EtherCAT Tech-
nology Group).
0x00000000 Identifier of the type of the welding system.
3 Code from which the robot identifies the welding system.
Example: 750012345 Serial number of the welding power source.
AX MIG Welder Name of the welding system.
Example: 1 Hardware version of the welding system.
Example: 1.23.4 Software version of the fieldbus module.
1...65535 Node address of the fieldbus module.
Value Description
0x0003 Code from which the robot identifies the welding system.
0x0368 Vendor identifier assigned for Kemppi.
AX MIG Welder Name of the welding system.
Fieldbus module ordering code.
Example: PSNK0012345 Serial number of the welding power source.
Example: 1 Hardware version of the welding system.
Example: 1.23.4 Software version of the fieldbus module.
Example: The unique address identifier of the fieldbus module's Ethernet
AA:BB:CC:DD:EE:FF ports 1 and 2.
131
Weld data view.
AX MIG Welder
Operating manual - EN
1921900 / 2318