Table of Contents
Advertisement
1.6 Cooling unit (optional)
Front
1.
Cooler container cap
2.
Cooling liquid level indicator
3.
Front locking interface (for locking on the stand)
4.
Front locking interface (for locking to the power source)
5.
Rear locking interface (for locking to the power source)
6.
Cooling liquid circulation button
>> Keeping the button pressed activates the pump and circulates the cooling liquid throughout the system. Once
released, the pump stops.
Rear
7.
Coolant outlet connector (color-coded)
8.
Coolant inlet connector (color-coded)
9.
Rear locking interface (for locking on the stand)
10. Cooling unit to power source connectors
11. Additional strain relief mount.
© Kemppi
20
AX MIG Welder
Operating manual - EN
1921900 / 2318
Advertisement
Table of Contents
