Table of Contents
Advertisement
3.3.14 USB backup and restore
This feature allows the current welding parameters, memory channels and other settings to be backed up on a USB
memory stick.
1.
Turn the welding equipment on.
2.
If creating a backup, go to the device settings and select Backup.
3.
If restoring from a backup, go to the device settings and select Restore.
4.
Connect the USB memory stick to the RCM's USB port.
5.
Follow the steps on the AX Manager screen to complete the backup/restore operation.
3.3.15 USB update
The USB update feature allows the firmware to be updated as well as welding programs, processes and features to be
installed using a USB memory stick.
There can be only one ZIP file on the USB memory stick inserted into the welding system at once. This can be either a
dedicated firmware pack for this welding system or a welding program and license pack (matching the power source
serial number). For more information on the available software and compatibility, contact your local Kemppi rep-
resentative.
Firmware and welding software
1.
Ensure you have the correct firmware/software ZIP package saved on your computer for the welding equipment in
question.
2.
Connect the USB memory stick to the computer.
3.
Prepare the USB memory stick by copying the firmware/software ZIP file into the root folder of the memory stick.
4.
Turn the welding equipment on.
5.
Connect the USB memory stick to the RCM's USB port.
© Kemppi
143
AX MIG Welder
Operating manual - EN
1921900 / 2318
Advertisement
Table of Contents
