•
Create from programs: Create new channels based on all of the licensed welding programs available
•
Delete all: Delete all channels.
3.2.3 Users
In the Users view you can change the user PIN code.
3.2.4 Weld Assist
Weld Assist is available for 1-MIG and pulse welding processes.
Weld Assist is a wizard-like utility for easy selection of welding parameters. The utility walks the user step-by-step
through the selection of required parameters.
The currently selected welding program, including filler wire and shielding gas information, is shown and used as a
basis in Weld Assist. If necessary, the welding program can be changed before continuing by selecting the default
welding program and selecting a new one from the list.
© Kemppi
102
AX MIG Welder
Operating manual - EN
1921900 / 2318