Kemppi AX MIG Welder Operating Manual page 103

1. Go to the Weld Assist view and select 'Next'.
2. Select:
>> The welding joint type: T-joint / lap joint / corner joint / plate+tube joint
>> The welding position: PA / PB / PC / PD
>> The plate thickness (1...12 mm)
>> The throat thickness (1...6 mm). Note: Throat thickness cannot be selected with corner joint. With lap joint, the
throat thickness cannot be selected when the plate thickness is 1...3 mm.
>> The travel speed (300...1500 mm/min)
© Kemppi
103
AX MIG Welder
Operating manual - EN
1921900 / 2318