Table of Contents
Advertisement
1.4 AX MIG Welder interconnection cable
The AX MIG Welder interconnection cables come in multiple different lengths and configurations to suit your equipment
setup.
For installing cables, refer to "Connecting cables to power source and RCM" on page 51 and "Connecting cables to wire
feeder" on page 49.
Power source end of interconnection cable
1.
Voltage sensing cable (required for WiseThin+ and WiseRoot+ processes)
2.
Shielding gas hose
3.
Welding current cable
4.
Wire feeder control cable.
Power source end of interconnection cable - water cooling
1.
Voltage sensing cable (required for WiseThin+ and WiseRoot+ processes)
2.
Shielding gas hose
3.
Cooling liquid hoses (inlet/outlet)
4.
Welding current cable
5.
Wire feeder control cable.
© Kemppi
16
AX MIG Welder
Operating manual - EN
1921900 / 2318
Advertisement
Table of Contents
