Table of Contents
Advertisement
R500 Wire Feeder EUR and R500 Wire Feeder EUR+, top
11. Gas test button
12. Air blow button (usable in R500 Wire Feeder EUR+ only)
13. Wire inch backward button
>> Drives the filler wire backward (with arc off)
14. Wire inch forward button
>> Drives the filler wire forward (with arc off).
1.3.1 Wire feed mechanism
1.
Pressure rolls and pressure roll mounting pins
2.
Pressure handles
3.
Pressure roll locking arms
4.
Inlet guide tube
5.
Middle guide tube locking clip
6.
Middle guide tube
7.
Outlet guide tube
8.
Rear drive roll and drive roll mounting cap
9.
Front drive roll and drive roll mounting cap.
© Kemppi
13
AX MIG Welder
Operating manual - EN
1921900 / 2318
Advertisement
Table of Contents
