Kemppi AX MIG Welder Operating Manual page 41

The figure below displays an overview of a digital IO add-on card. The In/Out LEDs (*) indicate the input and output
states (LED is lit when the input/output is active).
Digital IO add-on card terminals:
Terminal reference
X1
X2
X3
X4
X5
X6
X7
X8
X9
X10
X11
X12
X13
Required add-on card combinations
Add-on card slot 1
None
Digital IO add-on card (8 inputs +
8 outputs)
None
Digital IO add-on card (8 inputs +
8 outputs)
© Kemppi
Terminal name, add-on card slot 1
Power supply input
Digital output 1
Digital output 2
Digital output 3
Digital output 4
Digital output 5
Digital output 6
Digital output 7
Digital output 8
Digital input 1, 2
Digital input 3, 4
Digital input 5, 6
Digital input 7, 8
Add-on card slot 2
None
None
Digital IO add-on card (8 inputs +
8 outputs)
Digital IO add-on card (8 inputs +
8 outputs)
Terminal name, add-on card slot 2
Power supply input
Digital output 9
Digital output 10
Digital output 11
Digital output 12
Digital output 13
Digital output 14
Digital output 15
Digital output 16
Digital input 9, 10
Digital input 11, 12
Digital input 13, 14
Digital input 15, 16
Remarks
No digital IO add-on cards connected. The system
operates normally.
Digital inputs/outputs in the range of 1 ... 8 can be
used.
Digital inputs/outputs in the range of 9 ... 16 can be
used.
Digital inputs/outputs in the range of 1 ... 16 can be
used.
41
AX MIG Welder
Operating manual - EN
1921900 / 2318