Torque Converter; Draining Torque Converter; Checking Torque Converter - Audi A8 Workshop Manual

32 –

Torque converter

1 Torque converter
Overview
♦ ⇒ „1.1 Draining torque converter", page 17
♦ ⇒ „1.2 Checking torque converter", page 17
1.1

Draining torque converter

Drain the torque converter as follows if the ATF is very dirty due
to component wear, or when performing a major gearbox over‐
haul:
– Extract ATF from torque converter with used oil collection and
extraction unit -V.A.G 1782- .
1.2

Checking torque converter

– Check hub -arrow- of torque converter for scoring.
If scoring is visible on the torque converter hub:
– Renew torque converter.
Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by AUDI AG. AUDI AG does not guarantee or accept any liability
with respect to the correctness of information in this document. Copyright by AUDI AG.
Servicing automatic gearbox 09E, four-wheel drive - Edition 12.2011
Audi A6 2005 ➤ , Audi A8 2003 ➤
1. Torque converter
17