Configuring The Mvme167-34 Card - Northern Telecom NAC Installation Manual

Configuring the MVME167-34 card

Procedure 3-1
Configuring the MVME167-34 card
Step Installer's action and system's response
1 Shut down the NAC 2 software.
Refer to NAC 2 System Administration and Maintenance Guide (NTP
553-4011-510), "Maintenance and administration programs: system running"
chapter, "Shut down the system" section for instructions on shutting down your NAC
system.
2 Secure the NAC system for power down.
Refer to NAC 2 System Administration and Maintenance Guide (NTP
553-4011-510), "Maintenance and Administration programs: system shut down"
chapter, "Restart and Power Down Utilities" section, "Secure the System for Power
Down" subsection for more information.
3 Power down your system by flipping the power switch located to the left of the AEM
to the OFF position. Wait approximately 20 seconds, then flip the power switch to
the ON position.
The system displays the following at the maintenance console:
Copyright Motorola Inc. 1988 – 1994, All Rights Reserved
MVME167 Debugger/Diagnostics Release Version 2.2 – 01/14/94
COLD Start
Local Memory Found =02000000 (&33554432)
Network Administration Center (NAC) Installation Guide Product release 2
Once the upgrade or replacement is completed, follow Procedure 3-1 to
configure the MVME167-34 card.
—continued—
Hardware installation 3-49