Racal Vi2422Pa - Northern Telecom NAC Installation Manual

Racal VI2422PA

Procedure 4-4
Configuring the Racal VI422PA modem for remote diagnostics
Step Action
1 Connect a workstation with data format
8N1 and speed 2400 to the modem with
a straight through NT1R03Dx or
NT1R03Ex cable.
2 Connect the workstation and the
modem to their power sources.
3 Power up the workstation and the
modem.
4 Enter the following commands,
pressing {ENTER} after each
command:
at&f
atQ0
atV1
If you use a Racal VI2422PA modem at one end of the line you must use
the Racal VI2422PA modem at the other end as well. Both modems must
be set to the same speed.
Figure 4-12 illustrates the connection between the NAC remote diagnostics
port and a remote workstation using a Racal VI2422PA modem.
Complete the steps in Procedure 4-4 to configure the Racal modem for
remote diagnostics.
For more information on the Racal modem and its operation, refer to the
Racal VI2422PA Modem User's Guide that accompanies the modem.
Network Administration Center (NAC) Installation Guide Product release 2
Response
OK
OK
OK
—continued—
Peripheral devices 4-47