Table of Contents
Advertisement
1-2 Introduction
Installation responsibilities
Northern Telecom
Northern Telecom representative or Meridian 1 distributor
Application Equipment Module (AEM) hardware overview
553-4011-110 Standard 1.0 November 1994
The NAC 2 installation responsibilities fall upon two main groups:
Northern Telecom, and Northern Telecom representatives or Meridian 1
distributors.
The following installation procedures are performed by Northern Telecom.
Procure the hardware and software required for this installation.
Install the operating system and NAC application software
(factory-installed software only).
Ship the equipment and material to the NAC site.
The following installation procedures are performed by the Northern
Telecom representative or the Meridian 1 distributor.
Install the NAC, the printers, and the workstations.
Install the modems and associated connections.
Install the operating system and NAC application software,
customer-installed only.
Reinstall the operating system and the NAC application software
(customer-installed only).
Upgrade the NAC application software.
Configure the NAC.
Start the NAC.
Install the database.
Change the NAC system time.
For an Application Equipment Module (AEM) installation, please read and
follow any instructions given in the following chapters of the document
Application Equipment Module Installation Guide (NTP 553-3201-200).
"Overview"
"Installing a stand-alone AEM"
"Adding an AEM to a column"
Advertisement
Table of Contents
