Table of Contents
Advertisement
Peripheral devices
4-3
3PC with hard disk running Reflection 4+
If you are using a PC with a hard disk, power up the PC. When the PC
boots up, switch to the directory which contains the Reflection 4+ program
and enter R4 or R4 meridian.cfg (if previously run) to start the program.
PC without hard disk running Reflection 4+
If you are using a PC without a hard disk, power up the PC and insert the
DOS operating system disk in Drive A. When the PC boots up, insert the
Reflection 4+ operating disk in Drive B, and select Drive B. Enter R4 to
start the Reflection 4+ program.
Network Administration Center (NAC) Installation Guide Product release 2
Advertisement
Table of Contents
