External Input/Output Cables - Northern Telecom NAC Installation Manual

3-32 Hardware installation

External input/output cables

Table 3-6
External input/output cables
ENG code
NT1R03DB
NT1R03DC
NT1R03DF
NT1R03DP
NT1R03DV
NT1R03EB
NT1R03EC
NT1R03EF
NT1R03EP
NT1R03EV
NT7D47EA
NT7D58AB
NT7D58AD
NT7D58AF
NT7D58AL
NT7D58AT
NT7D58AV
553-4011-110 Standard 1.0 November 1994
NAC 2 external cables exit from the rear of the application module and
terminate on the Application Equipment Module's die-cast input/output
panel via a custom input/output panel and radio-filtered connectors.
Table 3-6 lists all of the external I/O cables. Figure 3-12 shows cabling
schematics, which identify the cables and devices which must be connected
for a system.
The term "input/output connector panel" refers to the "Generic I/O panel".
Application
Connects as input/output
between modems and
peripheral devices.
Connects as input/output
between modems and
peripheral devices.
Carries input/output
between the input/output
connector panel (Ethernet)
and the customer supplied
transceiver.
Connects as input/output
between terminals and
printers (with A0351509
gender changer).
Cable and connector
DB-25 (male) connector to
DB-25 (male) connector
DB-25 (male) connector to
DB-25 (female) connector
15-pin (male) connector
with thumb screws to
15-pin (female) connector
with sliding latch
25-pin (male) subminiature
D-style connector to 25-pin
(male) subminiature
D-style connector
—continued—
style
Length
61 cm (2 ft)
1.2 m (4 ft)
3 m (10 ft)
7.6 (25 ft)
13.7 m (45 ft)
61 cm (2 ft)
1.2 m (4 ft)
3 m (10 ft)
7.6 (25 ft)
13.7 m (45 ft)
3 m (10 ft)
61 cm (2 ft)
1.8 m (6 ft)
3 m (10 ft)
6.1 m (20 ft)
10.7 m (35 ft)
13.7 m (45 ft)