Racal Vi2422Pa - Northern Telecom NAC Installation Manual

Racal VI2422PA

Procedure 4-16
Configuring the Racal VI2422PA modem for network link
Step Action
1 Connect a workstation with data format
8N1 and speed 2400 baud to the
modem with a straight-through
NT1R03Ex cable.
2 Connect the workstation and the
modem to their power sources.
3 Power up the workstation and the
modem.
4 Enter the following commands,
pressing {ENTER} after each
command:
at&f
at*f0
at&zt#######
####### must be replaced with the
correct telephone number for the
Meridian MAX node.
No internal switch settings are required to configure the Racal VI2422PA
modem for use as a network link. Refer to the "Dial-up supervisor
modems" section, "Racal VI2422PA" subsection for more information.
To properly set up the Racal VI2422PA modem for use as a network link,
follow the instructions given in Procedure 4-16.
For more information on the Racal modem and its operation, refer to the
Racal VI2422PA Modem User's Guide that accompanies the modem.
Network Administration Center (NAC) Installation Guide Product release 2
Response
OK
OK
OK
—continued—
Peripheral devices 4-93