Table of Contents
Advertisement
Upgrading from NAC 1 on the HP Vectra
NAC connectivity overview
For system upgrades from NAC 1 on the HP Vectra platform to NAC 2 on
the AM, an external SCSI port is provided. This port is used to connect an
Archive 150 Mbyte tape drive for data downloading via a standard
cartridge. The external SCSI terminator at the rear of the AM is removed to
connect the external tape drive.
The AM must be shut down prior to connecting the external tape drive.
After the downloading is complete, and the external tape drive is removed,
the external SCSI device must be terminated using the external SCSI
terminator.
Figure 3-2 shows a simplified overview of the network connectivity
between a NAC and its various Meridian MAX nodes. Your site's layout
may be different.
Network Administration Center (NAC) Installation Guide Product release 2
Hardware installation 3-7
Advertisement
Table of Contents
