Northern Telecom NAC Installation Manual page 248

Procedure 7-1 (continued)
Load New Software Release for a NAC 2 system
Step Installer's action and system's response
Press b,r,l,h or q and ENTER:
6 Enter l, followed by {RETURN}, to run the Load New Software Release utility.
The system displays the following messages.
Upgrade of NAC software requires that you save the current
contents of the hard disk on a tape. Do you want to save the contents of the hard disk on a tape (y/n)?
7 If you have just made a backup of the hard disk, enter n, followed by {RETURN},
and go to Step 10.
If you have not made a current backup, or you are not sure whether the backup you
have is current, then enter y, followed by {RETURN}, in response to this prompt.
Network Administration Center (NAC) Installation Guide Product release 2
NAC Backup and Restore Utilities
Backup Customer Data to Tape
Restore Customer Data from Tape
Load New Software Release
Help
Quit to the main menu
—continued—
Loading a new software release 7-5