8-16 Software reinstallations and upgrades
Procedure 8-1 (continued)
Software reinstallation or upgrade to a NAC 2 system
Step
Installer's action and system's response
*
* You must REBOOT the system and allow it to autoboot from the hard * * disk. Please power off the
system now.
*
* Please allow 20 seconds between turning the power off and on again*
* to allow the power to reset.
*
32
After you turn off the power for the module, wait 20 seconds, and turn the power on
again; the system automatically reboots. Your system messages may differ.
Copyright Motorola Inc. 1988 – 1993, All Rights Reserved
MVME167 Debugger/Diagnostics Release Version 1.5 – 02/14/93
COLD START
Local Memory Found =02000000 (&33554432)
MPU Clock Speed =33Mhz
553-4011-110 Standard 1.0 November 1994
The NAC 2 product has been installed on the hard disk.
You may now remove the tape from the tape drive.
*
*
*
*
***************************
**** REBOOT THE SYSTEM ****
***************************
—continued—
*
Need help?
Do you have a question about the NAC and is the answer not in the manual?
Questions and answers