Northern Telecom NAC Installation Manual page 212

Procedure 6-1 (continued)
New installation of the NAC 2 system: customer-installed software
Step Installer's action and system's response
If you chose reentry point 4 in Step 18 (to restart the installation just before booting
from the hard disk for the first time), the system displays the following messages.
***> Mounting root file system as /root (TIME)
***> Mounting usr file system as /root/usr (TIME)
The system has been reset to perform the installation again, starting from the first boot from the hard
disk. Please perform the following steps:
1. Remove the tape from the tape drive.
2. Turn off the power for the module.
3. Wait 20 seconds for the power to reset.
4. Turn on the power for the module.
*********************************************************************
Please reboot the system now.
*********************************************************************
Go to Step 27.
21
*********************************************************************
*
* Stage 1 — Formatting Hard Disk Drive and Creating Filesystems *
*
*********************************************************************
Network Administration Center (NAC) Installation Guide Product release 2
*
*
—continued—
New software installations 6-11