Northern Telecom NAC Installation Manual page 269

8-12 Software reinstallations and upgrades
Procedure 8-1 (continued)
Software reinstallation or upgrade to a NAC 2 system
Step Installer's action and system's response
If you are performing an application upgrade, or if you chose reentry point 3 in Step
23 (to restart the installation just before copying the application files to the hard disk)
the system displays the following messages.
***> Mounting root file system as /root (TIME)
***> Mounting usr file system as /root/usr (TIME)
***> Installing NAC–specific configuration files (TIME)
***> Setting permissions on installation disk's root directory (TIME)
Go to Step 28.
If you chose reentry point 4 in Step 23 (to restart the installation just before booting
from the hard disk for the first time), the system displays the following messages.
***> Mounting root file system as /root (TIME)
***> Mounting usr file system as /root/usr (TIME)
The system has been reset to perform the installation again, starting from the first boot from the hard
disk. Please perform the following steps:
1. Remove the tape from the tape drive.
2. Turn off the power for the module.
3. Wait 20 seconds for the power to reset.
4. Turn on the power for the module.
*********************************************************************
Please reboot the system now.
*********************************************************************
Go to Step 32.
553-4011-110 Standard 1.0 November 1994
—continued—