4-82 Peripheral devices
Network link modems
NetComm SmartModem M7F
Figure 4-31
NetComm SmartModem M7F modem switch settings
1
OFF
ON
553-4011-110 Standard 1.0 November 1994
The following modems can be used for network links.
NetComm SmartModem M7F
UDS 2440
Ven-Tel 2400 Plus II
Ven-Tel 9600 Plus
Racal VI2422PA
Gandalf LDS 120E
Develcon DS 511A
To properly set up the NetComm modem for network link, ensure the
modem's switch settings match those shown in Figure 4-31. The same
switch settings should be used at both the remote end and the NAC end.
Note: There are two buttons located on the front panel of the modem:
Mode and Talk/Data. For use with the NetComm modem, the
Talk/Data button should be pressed.
FRONT
2
3
4
5
6
UP
DOWN
REAR
DSR DTR RTS
CD