Table of Contents
Advertisement
10-2 Operating modes
Changing the default language
Procedure 10-1
Switching the default language
Step
Action
1
Log into the NAC as Supervisor 0 (zero) in Precutover mode, Supervisor 11 or 22 in
Training mode, or any supervisor with access to the Parameter Administration feature
in Product mode.
2
Select the Parameter Administration feature from the main menu.
3
Select the Language Options feature from the Parameter Administration menu.
4
Select the Default Language field on the Language Options screen.
5
Press {PF2} to display the choices for the Default Language field. Use the up and
down cursor keys to select the language you want as your default language, and
press {ENTER}. This language appears in the Default Language field.
6
Press {PF1} to display the commands. Select the Save changes and exit command
and press {ENTER}. The system saves your changes and returns you to the main
menu.
7
Return to the main menu and log out of the NAC system. The next time you log into
the system the new default language you chose is used by the system.
553-4011-110 Standard 1.0 November 1994
NAC defaults to English. If you want to switch the default language from
English to the other installed language on your system, follow the steps
described in Procedure 10-1. This procedure can be performed any time
you want to switch your default language from English to your system's
secondary language. This procedure can also be used to change your default
language back to English.
Advertisement
Table of Contents
