Product Mode - Northern Telecom NAC Installation Manual

Product mode

Figure 10-2
NAC Precutover mode menu
The database parameters are entered through the Parameter Administration
option from the main menu. This is done by logging in at a supervisor's
workstation, initially as Supervisor 0. Refer to the "Parameter
Administration" chapter of the NAC 2 Supervisor's User Guide (P0724352)
for further information.
When the system is booted up after the transition from Training mode to
Precutover mode is completed, log into the maintenance terminal as
"precut", enter the password provided by your NT representative or
distributor. The Precutover mode menu is then shown (see Figure 10-2).
Product Mode
Shutdown the NAC System and Secure for Power Down
Help
Logout
Press p,s,h,or l and ENTER:
A menu of choices is provided by the system. Press h, followed by
{ENTER}, to obtain detailed information from the help facility on the
items in the menu as well as the default supervisor's ID information.
Network Administration Center (NAC) Installation Guide Product release 2
NAC 2 Pre-Cutover Mode
Operating modes 10-25