Northern Telecom NAC Installation Manual page 268

Procedure 8-1 (continued)
Software reinstallation or upgrade to a NAC 2 system
Step Installer's action and system's response
If you want to restart the installation just before the NAC application files are copied
to the hard disk, enter 3, followed by {RETURN}. The system displays the following
message.
You have chosen to start the NAC 2 install/upgrade at the
point where the application files are about to be copied to the
hard drive.
If you want to restart the installation just before the NAC system boots from the hard
disk, enter 4, followed by {RETURN}. The system displays the following message.
You have chosen to start the NAC 2 install/upgrade at the
point where the system is about to be booted from the hard disk
for the first time.
24 The system continues.
WARNING: NAC 2 installation/upgrade requires overwriting
the hard disk. This means that FILES AND DATA ON THE
DISK WILL BE DESTROYED.
–––> Do you wish to begin NAC 2 installation (y, n, q) ?:
25 If you want to begin the installation, enter y, followed by {RETURN}. The system
continues.
***> Beginning installation/upgrade (TIME)
***> Checking tape in drive (TIME)
If you chose not to restart a previously aborted installation or chose reentry point 1 in
Step 23 (to restart the installation from the beginning), go to Step 26.
If you chose reentry point 2 in Step 23 (to restart the installation just before copying
the OS files to the hard disk), go to Step 27.
Network Administration Center (NAC) Installation Guide Product release 2
Software reinstallations and upgrades
—continued—
8-11