Table of Contents
Advertisement
4-4 Peripheral devices
Video display terminal (VDT) workstation
553-4011-110 Standard 1.0 November 1994
Four types of video display terminal workstations are supported for NAC.
DEC VT220
DEC VT420 (North American model)
DEC VT420 (Worldwide model)
HP 700/32
Note: To differentiate between the North American and Worldwide
models of the VT420, view your workstation's set-up directory. If there
is a keyboard option, you are using the worldwide model. If there is no
keyboard option, you are using the North American model.
Other models may be used but they must be 100% compatible with one of
the models listed. Setups may differ slightly depending on the version of
the workstation.
DEC VT220 or 100% compatible
1
Refer to the vendor's manual for installation instructions.
2
The video display terminal (VDT) is connected to the AM's VME
multiport cable using an NT8D96AE (AM) cable. Refer to the
appropriate port assignment table for valid port assignments.
3
Power on the terminal and push the setup key. Some VDTs have
on-screen cues for changing settings and moving between menus. The
VDT manual contains the definitive instructions on setting up the
workstation's options.
Figure 4-1 provides the details to set up a DEC VT220 or 100%
compatible VDT. Each directory shown in Figure 4-1 has its own screen
and displays the correct setting for each field. If any of the fields shown
differ from those on your screen, cursor to the field and press {ENTER}
until the correct information is displayed. Complete these procedures
before powering on NAC.
Advertisement
Table of Contents
