Northern Telecom NAC Installation Manual page 300

9-8 Platform upgrades
Procedure 9-1 (continued)
Platform upgrade from a NAC 1 system to a NAC 2 system
Step Installer's action and system's response
25 Remove the OS tape and insert the application tape.
Wait for the tape to rewind. The tape drive light turns off when the tape is rewound.
–––> Is the NAC Application tape in the tape drive (y/n/q) ?
26 If the application tape is in the tape drive and the tape drive light is off, enter y,
followed by {RETURN}.
Checking to see that tape is ready for reading...
Extracting files...
The system displays the Tape ID Display.
NAC Tape ID
––––––––––––––
Product Release
Hardware Platform
If this information does not match the options listed on the tape
label, please type "n" to the following question. The installation will abort. Please call your service
representative for further assistance.
–––> Do you wish to install the tape options specified above (y/n) ?
27 If you want to abort the installation, enter n, followed by {RETURN}. If you want to
install the tape, enter y, followed by {RETURN}. The system continues.
Please remove the NAC Application tape from the tape drive
and insert the OS tape.
Is the OS tape in the tape drive (y/n/q)?
28 Remove the application tape and insert the OS tape. Wait for the tape to rewind. The
tape drive light turns off when the tape is rewound.
If the OS tape is in the tape drive and the tape drive light is off, enter y, followed by
{RETURN}.
553-4011-110 Standard 1.0 November 1994
: 02.xx
: SNN
—continued—